QHY410C Color Camera - Photographic Version

$3,695.00
Article number: QHY410C-PH
Availability: More on the Way to us

QHY410C uses Sony’s latest back-illuminated, full frame color sensor. The IMX410 is equipped with the sensor that used in the Nikon Z6,  and Sony A7III. In addition to BSI, the IMX410 also has larger 5.94 um pixels giving it increases sensitivity of extended objects in low light. The IMX410 is expected to be Sony’s most sensitive full frame color sensor for astrophotography.

QHY410C has 1GB DDRIII buffer to cache the image and avoid the risk of a frame loss. This avoids problems of a busy USB port when there are other peripherals using the same port as the camera.

 

BSI

One benefit of the back-illuminated CMOS structure is improved full well capacity. In a typical front-illuminated sensor, photons from the target entering the photosensitive layer of the sensor must first pass through the metal wiring that is embedded just above the photosensitive layer. The wiring structure reflects some of the photons and reduces the efficiency of the sensor.

In the back- illuminated sensor the light is allowed to enter the photosensitive surface from the reverse side. In this case the sensor’s embedded wiring structure is below the photosensitive layer. As a result, more incoming photons strike the photosensitive layer and more electrons are generated and captured in the pixel well. This ratio of photon to electron production is called quantum efficiency. The higher the quantum efficiency the more efficient the sensor is at converting photons to electrons and hence the more sensitive the sensor is to capturing an image of something dim.

 

TRUE RAW Data

In the DSLR implementation there is a RAW image output, but typically it is not completely RAW.  Some evidence of noise reduction and hot pixel removal is still visible on close inspection.  This can have a negative effect on the image for astronomy such as the “star eater” effect.  However,  QHY Cameras offer TRUE RAW IMAGE OUTPUT and produces an image comprised of the original signal only, thereby maintaining the maximum flexibility for post-acquisition astronomical image processing programs and other scientific imaging applications.

 

Anti-Dew Technology

Based on almost 20-year cooled camera design experience, The QHY cooled camera has implemented the fully dew control solutions. The optic window has built-in dew heater and the chamber is protected from internal humidity condensation. An electric heating board for the chamber window can prevent the formation of dew and the sensor itself is kept dry with our silicon gel tube socket design for control of humidity within the sensor chamber.

 

Cooling

In addition to dual stage TE cooling, QHYCCD implements proprietary technology in hardware to control the dark current noise.

 

 

 

Specifications
Model QHY410C
COMS Sensor SONY IMX410
Mono/Color Color
FSI/BSI BSI
Pixel Size 5.94um*5.94um
Effective Pixel Area 6072* 4044
Effective Pixels 24.5 MP
Sensor Size Full Frame

 

36mm* 24mm

Fullwell 120ke-
AD Sample Depth 14bit (Output as 16bit and 8bit)
Full Frame Rate 14 FPS  @8BIT

 

7 FPS @16BIT

Readout Noise 3.75e- @low gain

 

1.1e- @high gain

Dark Current 0.01e /pix/s @0C

 

0.002e /pix/s @-20C

Exposure Time Range 100us-3600sec
Unity Gain 90(low gain)

 

40 (high gain)

Amp Glow Zero Amp
Shutter Type Electric Rolling Shutter
Computer Interface USB3.0
Built-in Image Buffer 1GByte(8Gbit)
Cooling System Dual Stage TEC cooler(about -35C below ambient)
Optic Window Type AR+AR High Quality Multi-Layer Anti-Reflection Coating (For color camera user need to add a UV/IR filter in the light path)
Anti-Dew Heater Yes
Telescope Interface M54/0.75
Back Focal Length 17.5mm
Weigth 785g
Reference Price USD3695
Curves

Mechanical Dimensions

Accessories and Match
Combos and Adapter Kits

Generally speaking, there’s no need for an OSC (one shot colored) camera to match filter wheel. If there’s any special needs, please refer to mono cam combos and choose the corresponding filter wheel. All OSC cams use OAG M if needed.

Model BFL Consumed
QHY600C/268C/410C/367C/128C/247C/168C 17.5mm+6mm (CAA)
OAGM 10mm

 

*About IR-Cut filter

The sealing glass of QHY OSC cameras whose format are above APS-C is AR glass instead of IR/Cut filter. That’s because when the sensor size is bigger, if IR/Cut is closed to sensor, it’s easy to cause haloing effect on image. We use IR/Cut filter as sealing glass on 4/3 format cameras or below, like 163C, 183C; as for big sensor OSC cams, such as 268C, 367C, we provide a special adapter for fixing 2-inch IR/Cut filter at a farther position from the sensor, or users can fix the filter inside the default T mount.

D1

D1: Connecting MPCC with 55mm BFL and M48 interface

If you don’t use an OAG, please use 10mm adapter in the adapter kits to fill the original position of OAG.

D2

D2: Connecting Canon EF Lens


D3

Connecting Nikon F Lens

0 stars based on 0 reviews