||More on the Way to us
The Arcturus Cheshire Collimation Eyepiece is ideal for precise collimation of Newtonians and helpful for aligning Schmidt-Cassegrains. This special eyepiece fits into 1¼" focusers or diagonals. Alignment is easy using the small opening on one end and thin cross hairs at the other end. The collimation eyepiece is more accurate than the simple Collimation Tool.
The Arcturus Cheshire Sight Tube has the precisely centered sighting hole and crosshairs of a sight tube, plus the cutout in the side of the tube with the precise 45° angle matte silver reflecting surface of a Cheshire eyepiece. As it is a combination tool, it is less expensive than buying a separate sight tube and Cheshire.
For the sharpest images with a Newtonian reflector, the optics must be carefully collimated (aligned). First, the diagonal mirror must be properly centered under the focuser and aimed at the primary mirror. You cannot assume that the diagonal mirror has been properly set up at the factory, or that it did not accidentally get knocked out of alignment during transport. If the diagonal is indeed out of alignment, collimating the primary mirror becomes difficult. This is particularly true with fast focal ratio (f/4 to f/5) reflectors, as even slight collimation errors in these systems can significantly degrade the image.
Use the sight tube crosshairs of the sight tube to confirm that your diagonal mirror is properly centered under the focuser and adjust it if needed. It then lets you adjust the tilt of the diagonal to aim it accurately at the center of the primary. Once you’ve set the position and orientation of the diagonal mirror with the sight tube function, use the Cheshire eyepiece function to properly align the primary mirror.
The sight tube/Cheshire tool combination generally provides accurate enough collimation for visual use and most photography. The Arcturus Cheshire Sight Tube collimating tool is primarily designed to be used in daylight or early twilight, but the Cheshire function can also be used in complete darkness (for those times when you can’t set up until late) by shining a red flashlight into the 45° reflecting cutout in the side of the tube.