Home :: Accessories :: Filters :: Solar Filters :: White Light Solar Filters :: White Light Solar Wedge

White Light Solar Wedge

Types of Solar Filters

There are two types of solar filters: white light and hydrogen-alpha.  White light solar filters are simply very dark neutral density filters (see the Planetary Filter section).  These allow you to see sunspots on the surface of the sun and are ideal for viewing solar eclipses and transits of Mercury or Venus.  Hydrogen-alpha filters are narrowband filters.  These allow you to view solar flares, prominences, and other associated activity.

Unlike other types of filters for astronomical observing, solar filters fit over the front of the telescope, completely covering the aperture.  This is to protect not only the observer's eyes but also the optics themselves.  The telescope's optics would become very rapidly heated and potentially damaged without the filter in place.


White Light Solar Filters

White light filters transmit the entire visible spectrum of light but attenuate it to a level that makes observing safe.  A filter designed for visual observation transmits only 0.001% of the sun's light.  Solar filters look like mirrors because so little light is passing through them.

White light filters allow the photosphere of the sun to be observed.  The photosphere is the "surface" of the sun (inasmuch as a ball of gas has a surface).  It is the layer of the sun that generates most of the light and is therefore easiest to see.  This is also where sunspots occur, so these features are easily observed with white light filters.  Events such as partial and total solar eclipses and planetary transits are most often observed with white light filters.  In addition to sunspots, granulation (texture) on the surface of the sun can be seen.  However, solar prominences may not be observed with a white light filter and require the use of a hydrogen-alpha filter.

White light filters are made either from glass coated with metallic layers, or are made from thin sheets of film such as Mylar or similar material.  The glass filters are often considered the safest option for sharing views of the sun with groups of people, since it is hard to damage the glass filter while in use.  It is possible to tear a film-type filter, although you would have to try pretty hard to do it.  On the other hand, dropping a glass filter will likely shatter it, while a film filter would most likely be unharmed.  The best quality filter currently available (2006) is made from a film material called Baader Astro Solar Film.

Most filters provide a white image of the sun, while some give a yellow-orange color.  Mylar filters give a slight bluish color, but the Baader film (which is similar to Mylar in physical appearance) gives a pure white image.  Observers sometimes use an orange colored filter to make the sun look the color people expect to see, but the image quality is fine no matter the color.

Above:  An image of the sun through a white light solar filter

Above:  Typical white light solar filters made from glass (top) and film


Sort by: Product Price Default
Polarizing Filters for White Light Wedges
  • A Polarizing Filter will help control the brightness of the Sun’s image when using a Lunt White Light Wedge visually.
  • Choose either a 1.25″ or 2″ Polarizing Filter, whichever size matches the barrel of your eyepiece.

Our price: $49.00 (€42.63)
White Light Solar Wedges
  • View or image the Sun in white light with a Lunt Solar Wedge!  This diagonal-type solar filter inserts into the focuser of your nighttime telescope for safe viewing of eclipses, sun spots, and more.
  • Available in either a 2″ or 1.25″ model.  1.25″ is best for refractors 4″ and under, and the 2″ is best for refractors 6″ and under.
  • The addition of a polarizing filter (sold separately) is recommended when using the solar wedge visually.

Our price: $229.00 (€199.23)