Home :: Accessories :: Finderscopes & Brackets :: Finderscope Brackets :: 50mm Finderscope Brackets

50mm Finderscope Brackets

Products

Sort by: Product Price Default
  •  per page
Arcturus 50mm Quick Release Finder Bracket

Quick Mount Rings remove from their base with thumbscrew. Mounting hole spacing is 1.3", inside ring diameter is 2.4"


Our price: $49.95 (€43.46)
Market price: $59.95 , save 17%
Quantity
Finderscope Rings and Base for Televue clamshells

Finderscope rings and base that mount most Takahashi focusers. Refer to the technical drawing below to ensure this base will fit your telescope. This ring system will also mount to a camera tripod using the center 1/4-20 threaded hole.


Our price: $59.00 (€51.33)
Quantity
Stellarvue 50 - 60 mm Finder Rings - Mounts to Feather Touch 2.5" - 3.5" Focusers - R050FA

High profile Finderscope rings and mounting base system for various telescopes. This mounting system sits higher than the others.

Made to mount  50 - 60 mm finder scopes to the Feather Touch 2.5” - 3.5” focusers. Will not mount to Feathertouch 2" focusers. The shoe mounts to these specific focusers, to any flat surface, or to a tube that is 4” or greater in diameter. When installing the shoe on the Feather Touch focuser obtain 8-32 screws of the proper length. Please be aware if the screws are too long they will scratch the focuser drawtube. So take the shoe with you to make sure the screws are not too long.


Our price: $69.00 (€60.03)
Quantity
Stellarvue 50 - 60 mm Finder Rings - Mounts to Most Finderscope Dovetail Shoes - R050DA

This ring set mounts to many dovetail shoes on the market including Stellarvue, Synta and others. The width of the foot at the bottom of the stalk measures about 1.21” (31 mm) maximum width and tapers to a width of about .82” (21 mm). The diagram below shows the dimensions of the stalk in millimeters:


Our price: $49.95 (€43.46)
Quantity
Stellarvue 50 - 60 mm Finder Rings - Mounts to Schmidt-Cassegrains - R050ST

Made to mount our 50 - 60 mm finderscopes to a Schmidt-Cassegrain (SCT) telescope. This has a bracket that attaches to the mirror cell on 8” and larger Celestron or Meade SCTs.


Our price: $59.00 (€51.33)
Quantity
Stellarvue 50 - 60 mm Finder Rings - Mounts to SV Clamshells, Flat or Curved Surface - R050AT

This ring set for 50/60 mm finders comes with our new more stable TPFD rail and a small, quick release FB dovetail shoe. This ring system will mount to:

  • Dobsonian telescopes (base attaches to flat or curved surfaces)
  • 2" Crayford focusers (base attaches to the focuser with a singe screw)
  • Stellarvue and Televue clamshells
  • Any tube (requires drilling two holes)

Our price: $49.00 (€42.63)
Quantity
Stellarvue 50 - 60 mm Finder Rings - Mounts to SV Clamshells, Flat or Curved Surface - R050AT

Use this ring set to mount your 50 mm or 60 mm finderscope to the top of a telescope's 1" wide, hinged mounting 

ring. Your telescope mounting rings must be about 1” thick and have either a 1/4-20 or 6 mm threaded center hole.


Our price: $49.00 (€42.63)
Quantity
Stellarvue Clamshell for 50 mm Finder or Guidescope - R050C

This is a one piece clamshell ring for our 50 mm finderscopes and Guidescopes. It will not fit any other finderscope. This solid clamshell has velvet lining and a compression ring that allows the user to rotate or position the finder/guide scope as needed and then lock it in place. A separate mounting base is included with 1/4-20 threaded holes (see drawings).


Our price: $49.00 (€42.63)
Quantity
Televue Quick Release Finder Mount - Universal

* Televue Universal Finderscope Mount fits all Televue Clamshell OTA rings. * Features quick release system! * Televue Universal Finderscope Mount turns the SolSearcher into a quick release accessory. * Includes the QRD-1006 (Dovetail) and the QRB-1002 (Quick Release Bracket). * Five year Televue Warranty.


Our price: $135.00 (€117.45)
Market price: $160.00 , save 16%
Quantity
  •  per page