Home :: Mounts & Tripods :: Mounts :: Stellarvue :: Mount Accessories

Mount Accessories

Products

Sort by: Product Price Default
  •  per page
Stellarvue Heavy Duty Dual Rings for 105mm telescopes
105 mm dual hinged rings. Used on our 102 - 105 mm telescopes, these rings work with Stellarvue 105 mm OD tubes. They are not sized for other brands telescopes. The rings have five 1/4-20 threaded holes top and bottom. This includes a center hole, two holes that are 1.5” apart and two holes that are 60 mm apart. Made in the USA on our cnc machines using 6061 T6 aluminum.

Our price: $129.00 (€112.23)
Quantity
Stellarvue Mount Handle

A 5/8" diameter aluminum rod with a foam handle for ease in moving the mount around the heavens. Handle bolts directly to either the TD2 or TD7 dovetails so this handle works with any of the Stellarvue Alt Azimuth mounts. It is shown with the M1 but it works equally well with the MG. This new design is curved so it does not interfere with the telescope. Compact design. Black anodized finish with soft foam handle, excellent under cold conditions

This mount handle allows the user to move the telescope without putting pressure on the focuser, when using a Stellarvue mount. The handle attaches to the dovetail shoe on any Stellarvue mount. Made to attach directly to the TD65 Vixen style shoe or the TD7 Losmandy Style shoe. Rotating either shoe 180 degrees allows the handle to be placed either below or above the centerline. The handle is made of 6061-T6 aluminum bar with a cushioned grip.


Our price: $24.00 (€20.88)
Quantity
Stellarvue Spring Loaded 7" Dovetail Shoe - Losmandy - TD007

Now made in Stellarvue's cnc shop , this larger shoe holds the Losmandy style rails, This shoe attaches to a mount with either 6 mm or 14”-20 screws.


Our price: $99.00 (€86.13)
Quantity
Stellarvue 7 inch CNC Aluminum Mounting Rings

7" I.D. CNC aluminum mounting rings. Has five holes top and bottom including a center hole, two holes 1.5" apart and two holes 60mm apart


Our price: $250.00 (€217.50)
Quantity
Stellarvue 90 mm Hinged Mounting Ring Set - R090SET

90 mm dual hinged rings. 90 mm ID with five 1/4-20 threaded holes top and bottom. This includes a center hole, two holes that are 1.5” apart and two holes that are 60 mm apart. Made in the USA on our cnc machines using 6061 T6 aluminum.


Our price: $129.00 (€112.23)
Quantity
Stellarvue Column for M2 mount head

To use the M-2 mount with a standard or surveyor’s tripod, our heavy duty MEC2 column is required. Like the M-2, this column is made in the USA of 6061-t6 aluminum. The M-2 mount head bolts to the top of the column with three side screws. This eliminates rotation between the mount and column.

Add the extension column only to the mount head purchase. Mounts to surveyor tripods using a 5/8-11 bolt. All our tripods use this larger 5/8” bolt so you can tighten the column securely to our tripods. If you tripod uses a different sized mounting bolt, contact us. We can make an adapter to fit your tripod.

Note: This column is made for the M-2 mount head. The head attaches to three holes at the top of the column. So the column will not work with our former M1 mount. 


Our price: $79.00 (€68.73)
Quantity
Stellarvue Extension Column - M2/M2D Head to Tripod with 10 mm Attachment Bolt such as many Vixen tripods, Celestron CG4, CG5, VX,- MEC010

To use the M-2 mount with an import tripod that uses a 10 mm attachment bolt (such as many Vixen tripods, Celestron CG4, CG5, VX, Etc), use this column. Like the M-2, this column is made in the USA of 6061-t6 aluminum. The M-2 mount head bolts to the top of the column with three side screws. This eliminates rotation between the mount and column.

Add the extension column only to the mount head purchase. Mounts to import tripods using a 10 mm attachment bolt. 

Note: This column is made for the M-2 head. The head attaches to three holes at the top of the column. So the column will not work with our former M1 mount


Our price: $79.00 (€68.73)
Quantity
Stellarvue Extension Column - M2/M2D Head to Tripod with 12 mm Attachment Bolt such as Celestron CGEM- MEC012

To use the M-2 mount with an import tripod that uses a 12 mm attachment bolt (such as Celestron CGEM tripod), use this column. Like the M-2, this column is made in the USA of 6061-t6 aluminum. The M-2 mount head bolts to the top of the column with three side screws. This eliminates rotation between the mount and column.

Add the extension column only to the mount head purchase. Mounts to any tripod that uses a 12 mm attachment bolt. All our tripods use this larger 5/8” bolt so you can tighten the column securely to our tripods. If you tripod uses a different sized mounting bolt, contact us. We can make an adapter to fit your tripod.

Note: This column is made for the M-2 head. The head attaches to three holes at the top of the column. So the column will not work with our former M1 mount


Our price: $79.00 (€68.73)
Quantity
Stellarvue Ring Set for SV/SVA130 Refractors - R130SET

Stellarvue dual hinged rings for our 130 mm refractors. Used on our SV/SVA130 refractors, these rings work with 5.5" O.D. tubes. They are not sized for other brands telescopes. The rings have five 1/4-20 threaded holes top and bottom. This includes a center hole, two holes that are 1.5” apart and two holes that are 60 mm apart.


Our price: $199.00 (€173.13)
Quantity
Stellarvue Riser Block Set - RB001SET

Riser blocks are used when mounting telescopes to rails when more room is needed between the rail and the telescope.


Our price: $39.00 (€33.93)
Quantity
  •  per page