Arcturus Light Shrouds

Products

Sort by: Product Price Default
  •  per page
Custom Light Shroud for 18 Inch Truss Dobsonian (Any Brand)
This lightweight Arcturus light shroud fits any 18" truss-tube Dobsonian reflector. each of these larger shrouds are custom-altered to fit exactly your scope. Upon ordering, we will contact you in order to check your eact measurements. Your shroud will be made exactly to your order!
It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs.
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when you’re done observing.

An ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $119.95 (€104.36)
Quantity
Custom Light Shroud for 20 Inch Truss Dobsonian (Any Brand)
This lightweight Arcturus light shroud fits any 20" truss-tube Dobsonian reflector. each of these larger shrouds are custom-altered to fit exactly your scope. Upon ordering, we will contact you in order to check your eact measurements. Your shroud will be made exactly to your order!
It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs.
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when you’re done observing.

An ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $129.95 (€113.06)
Quantity
Custom Light Shroud for 22 Inch Truss Dobsonian (Any Brand)
This lightweight Arcturus light shroud fits any 22" truss-tube Dobsonian reflector. each of these larger shrouds are custom-altered to fit exactly your scope. Upon ordering, we will contact you in order to check your eact measurements. Your shroud will be made exactly to your order!
It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs.
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when you’re done observing.

An ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $149.95 (€130.46)
Quantity
Custom Light Shroud for 25 Inch Truss Dobsonian (Any Brand)
This lightweight Arcturus light shroud fits any 25" truss-tube Dobsonian reflector. each of these larger shrouds are custom-altered to fit exactly your scope. Upon ordering, we will contact you in order to check your eact measurements. Your shroud will be made exactly to your order!
It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs.
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when you’re done observing.

An ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $179.95 (€156.56)
Quantity
Custom Light Shroud for Meade 10 Inch Lightbridge
This lightweight Arcturus light shroud fits the Meade 10" LightBridge truss-tube Dobsonian reflector only. It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs. Reinforced button holes are stiched into the cover so that it quickly attaches to the scope and fits as if it were a custom-tailored suit!
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when you’re done observing.

The six pole truss-tube design of the Meade LightBridge Dobs (compared to the eight-tube design of other Dobs) means that unless special measures are taken, an ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $39.99 (€34.79)
Quantity
Custom Light Shroud for Meade 12 Inch Lightbridge
This lightweight Arcturus light shroud fits the Meade 12" LightBridge truss-tube Dobsonian reflector only. It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs. Reinforced button holes are stiched into the cover so that it quickly attaches to the scope and fits as if it were a custom-tailored suit!
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when you’re done observing.

The six pole truss-tube design of the Meade LightBridge Dobs (compared to the eight-tube design of other Dobs) means that unless special measures are taken, an ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $49.95 (€43.46)
Quantity
Custom Light Shroud for Meade 16 Inch Lightbridge
This lightweight Arcturus light shroud fits the Meade 16" LightBridge truss-tube Dobsonian reflector only. It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs. Reinforced button holes are stiched into the cover so that it quickly attaches to the scope and fits as if it were a custom-tailored suit!
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when you’re done observing.

The six pole truss-tube design of the Meade LightBridge Dobs (compared to the eight-tube design of other Dobs) means that unless special measures are taken, an ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $99.95 (€86.96)
Quantity
Custom Light Shroud for Meade 8 Inch Lightbridge
This lightweight Arcturus light shroud fits the Meade 8" LightBridge truss-tube Dobsonian reflector only. It is made of durable black cloth, with double-stitched seams for durability. It improves image contrast, protects the mirror from dropped eyepieces, and retards the formation of dew. Quick-release drawstrings with push-to-open clasps at each end of the light shroud let you snug up the ends of the light shroud over the no-tools knobs. Reinforced button holes are stitched into the cover so that it quickly attaches to the scope and fits as if it were a custom-tailored suit!
This holds the light shroud in place on the scope, making it easy to install on your assembled scope, and equally easy to remove when youre done observing.

The six pole truss-tube design of the Meade LightBridge Dobs (compared to the eight-tube design of other Dobs) means that unless special measures are taken, an ordinary plain cloth light shroud will sag into your scope’s light path and effectively reduce your aperture asymmetrically. This Arcturus light shroud is not an ordinary plain cloth shroud.

It has two stiffening hoops (of the same flexible ABS plastic used in their roll-up dew shields) that help the light shroud keep its tubular shape. These 2" wide stiffening hoops are sewn into cloth pockets five inches below each end of the light shroud and effectively keep the light shroud cloth from sagging into the telescope light path. The stiffening hoops are designed to rest on the trusses just below the no-tool knobs that hold the trusses to the secondary cage and mirror box. Blocking the light path with a sagging light shroud becomes a non-issue with an Arcturus Shroud.

Our price: $39.99 (€34.79)
Quantity
  •  per page