Celestron Finderscope Bracket-Quick Rel for 50mm on C8,C11,C9.25
For 50mm finderscopes:C8, C9-1/4 and C11
A unique bracket for 50mm finderscopes, it?s designed for 8", 9 1/4" and 11" Schmidt-Cassegrain Telescopes. No tools are required, and once it?s aligned, you can take it off and put it on without lo... [more]
Very similar to the Starbeam channel assembly, it fits in the slots on all Televue ring mounts. This mount includes a dovetail, so that TV60 scopes can be converted from "stand-alone to "finderscope" application.
This part allows the AAM-0001 X-Y accessory mount to be attached to the SAB-1001 SCT accessory bracket. This allows theTV60 or Starbeam to be used as a "finderscope" on SCTs.
Televue Dovetail for Televue Quick Release Bracket
* Televue QRD-1006 Dovetail Base created for the Televue QRB-1002 Quick Release Bracket.
* Full metal base with pre-drilled holes.
&nb... [more]
This bracket will fit in the slots on all Televue ring mounts. It permits Orion and Vixen and other "stalk=type" finders to attach in a quick-release fashion. The quick release Finder Bracket uses two screws for extra security.
fits Orion and Synta style finder bases, and has two-screw
adjustment with spring loading. For finders with 2.125" tubes, like
the Antares model shown. Base sold separately below.
Finder scopes not included with mounts!
This plastic finder scope adaption block fits directly into the dovetail grooves on Televue tube mounting rings and is fixed into place with hex-head bolts. Now just install the Losmandy 50mm quick release bracket (#LQRB) and you can put any optional 5... [more]
The Quick-Release Universal Finder Mount (QFM-1008) accommodates any 50mm finders and others up to about a 2.5" outside diameter. Precision machined and black anodized to match and mate with all Tele Vue telescopes. The Universal Finder Mount will sati... [more]
Dovetail Base for Finder Scope
* Ideal for custom installation of any Orion finder scope on any non-Orion telescope
* Aluminum base fits any diameter tube
A dovetail base is available for attaching the Arcturus Deluxe Red Dot Finder to a standard Vixen/Orion dovetail base. The dovetail base is a low-profile base that is best used for dovetail mounts attached to the optical tube. The center of the MRF win... [more]
A flat base Original version of Deluxe RDF Flat Base is available for attaching to a flat surface or a surface with low curvature. The flate base has two contersunk holes for attaching the base to a scope or mouting bracket. Also, the flat base is supp... [more]
This is an aluminum stalk that has the dovetail groove for the F2 finder. The other side is a dovetail that fits most dovetail shoes found on Chinese focusers (like the ED80) and import reflectors. The dovetail at the bottom is 1 3/16? max... [more]
F2 Mounting Base and quick release system for hinged mounting rings. Made here on our cnc machines. Includes a dovetail shoe that mounts to any 1" wide hinged ring using a center hole. Includes a stalk that mounts the finder to the dovetail shoe ... [more]
The R50A comes with a quick release dovetail base that mounts to the new Stellarvue CNC clamshells. Rings are 2 11/16? I.D. and come with stainless and nylon adjustment screws. Works with our 50mm and 60mm finderscopes
This includes dual finderscope rings mounted to a stalk that fits most dovetail shoes found on Chinese focusers (like the ED80) and on the main tube of most import reflectors. Dovetail base is 1 3/16? maximum width at bottom and will work in dov... [more]
Stellarvue Finderscope Rings for mounting to hinged rings
This ring system includes a dovetail base that attaches to one of Stellarvue's hinged telescope mounting rings. Also mounts to any hinged ring that is about 1" wide and has a center hole on top threaded for either a 6 mm or 1/4-20 screw. The two fin... [more]
Finderscope rings and base for Stellarvue clamshells & SCTs
The R50S comes with dovetail shoe that mounts to the top or side of the Stellarvue Clamshells or to the rear cell of your SCT. It mounts with two screws into holes that are spaced 1.125" - 1.55" apart. The dovetail shoe holds the finder rings and dovet... [more]
High profile Finderscope rings and mounting base system for various telescopes. This mounting system sits higher than the others. It was designed for the massive 3.5" Feather Touch focuser but it may also be used on
&nbs... [more]
The R50T comes with a quick release dovetail base . This one mounts to the Televue Clamshells. Rings are 2 11/16? I.D. and come with stainless and nylon adjustment screws. Works with 50mm and 60mm finderscopes
The R50TAK comes with a quick release dovetail base that mounts to the standard Takahashi base with two holes 28mm apart. Rings are 2 11/16? I.D. and come with stainless and nylon adjustment screws. Works with 50mm and 60mm finderscopes
Change your R50 or R80 finderscope rings from one telescope to the next. This dovetail shoe mount to the top of a hinged ring that is 1" wide and has a flat top and center hole that is either 6 mm or 1/4-20
Use this with your other telescope (when it has the dovetail shoe above installed) and you can do a quick change, removing only the finder, rings and rail.
Now you can convert your finderscope with dual rings out of your telescope mount and slide it into this adapter that will allow you to use your finderscope on any camera tripod using the standard 1/4-20 screw
This adapter mounts directly to the Takahashi finder base with 28mm side by side hole spacing. Attach the adapter base to the Tak, then screw the top to the adapter and our finderscope rings will work on your Takahashi.
80mm Finderscope Rings and base for Stellarvue Clamshell
The Rings are 3 7/8" I.D. and come with nylon tipped stainless steel adjustment screws. Slide the rings and finder into the dovetail and lock it in place with the thumb screws. A safety catch is located on one end of the dovetail rail so the finder wil... [more]
This includes our dual finderscope rings mounted to dovetail base that fits most finderscope dovetail shoes. Mounts to dovetail shoes found on scts, Chinese focusers (like the ED80) and on the main tube of most import reflectors. Dovetail base i... [more]
80mm Finderscope Rings for mounting to hinged rings
This ring system includes a dovetail base that attaches to one of our hinged telescope mounting rings. Also mounts to any hinged ring that is about 1" wide and has a center hole on top threaded for either a 6 mm or 1/4-20 screw. The two finderscope rin... [more]
This quick release mounting system is made for mounting rings on the rear cell of most SCT's. The base attaches with two screws that are 1.125" - 1.55" apart. The base is low profile and places the rail between the rings only 1 1/8" above the ... [more]
80mm Finderscope rings and base for Televue clamshell
The R80T comes with a quick release dovetail base . This one mounts to the Televue Clamshells. The Rings are 3 7/8" I.D. and come with nylon tipped stainless steel adjustment screws.
The R80TAK comes with a quick release dovetail base that mounts to the standard Takahashi base with two holes 28mm apart. The Rings are 3 7/8" I.D. and come with nylon tipped stainless steel adjustment screws.
